Mikrokontroller
Rp. 45,000
Stok : 0 pcs
Spesifikasi :
1. Uses FT232 instead of CP2102
2. NodeMCU has built-in USB-TTL serial with super reliable industrial strength FT232 for superior stability on all supported platforms.
3. Communication interface voltage: 3.3V.
4. Antenna type: Built-in PCB antenna is available.
5. Wireless 802.11 b/g/n standard
6. WiFi at 2.4GHz, support WPA / WPA2 security mode
7. Support STA/AP/STA + AP three operating modes
8. Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
9. D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
10. AD0: 1 channel ADC
11. Power input: 4.5V ~ 9V (10VMAX), USB-powered
12. Current: continuous transmission: 70mA (200mA MAX), Standby: 200uA
13. Transfer rate: 110-460800bps
14. Support UART / GPIO data communication interface
15. Remote firmware upgrade (OTA)
16. Support Smart Link Smart Networking
17. Working temperature: -40 ~ + 125
18. Drive Type: Dual high-power H-bridge driver
19. Flash size: 4Mbyte
20. termasuk kabel usb